RD-010RM【PC リア スプリング(多重巻タイプ、ミディアム、2個入)】¥780(税別)

  • このエントリーをはてなブックマークに追加

Pタイル、カラーコンクリート等、比較的低グリップな路面に特化した 多重巻タイプの PC (Plastic tile, Concrete) リアスプリングです。

素材、焼入温度、焼入時間に至るまで徹底的にこだわり、様々な車重や路面グリップに合わせて選択できるよう 多重巻タイプにて 3種類(ミディアム、ミディアムハード、ハード)をラインナップしました。
リアスプリングでは初めてとなる 線間密着構造を採用することで、低グリップ路面でも圧倒的なトラクション性能とレスポンスの向上を実現しました。
2WAY構造により スプリングの上下を入れ替えることで、瞬時にコースに合わせた調整が可能です(詳細は以下の解説を参考にして下さい)。

<ミディアムスプリング主要諸元>
■長さ(自然長):32mm
■巻数:9.5巻
■識別用 熱収縮チューブ色:ブラック

RD-010RM [PC Rear Spring (Progression type, Medium, 2 pieces)]  780 JPY (without Tax)

This is a dual progression rear spring, specialized for road surfaces with comparatively low grip such as P tiles and painted concrete!

We did a lot of research selecting the material, steel quenching temperature and quenching time with many results to compare. Giving us a lineup of three types of rear spring (Medium, Medium Hard, Hard) that can be selected according to the vehicle weight and road surface grip.
With the 2-way structure, the springs can be flipped up and down to instantly adjust to the circuit track conditions. (Please refer the following explanation for details)

<Main specifications of Medium spring>
■ Length (natural length): 32mm
■ Number of turns: 9.5
■ Shrink tube color ID : Black

◆PC リア スプリング マッチング表 / PC Rear spring matching table

<2WAY構造解説 / Introduction of 2WAY structure>
◆線間密着部 を上側にして使用した場合 / Contact lines UP

線間密着部を上側にして使用した場合、スプリングの重心が高くなり、サスペンションの沈み込みを誘発します。トラクションを高め、スロットル オン時の蹴り出しを強くします。
By raising the center of gravity of the spring, the droop of the suspension is induced and the kicking out feeling is stronger.

 

 

◆線間密着部 を下側にして使用した場合 / Contact lines Down

線間密着部を下側にして使用した場合、スプリングの重心が低くなり、過度なサスペンションの動きを抑制します。安定感を向上させたい場合等にオススメです。
By lowering the center of gravity of the spring, excessive suspension movement is suppressed and stability is increased on low grip surfaces.

 

◆識別用 熱収縮チューブ / Heat shrink tube for identification

スプリングの識別に便利な 熱収縮チューブを同梱しました。
(※ミディアム:ブラック、ミディアムハード:イエロー、ハード:レッド)
お好みの長さに切り取り、画像を参考にスプリングに装着し、ドライヤー等で温めて固定して下さい(※ドライヤーを使用する際は火傷等に充分ご注意下さい)
A heat-shrinkable tube is bundled for easy identification of springs.
(* Medium: Black, Medium Hard: Yellow, Hard: Red)
Cut it to your desired length, attach it to the spring with reference to the image, warm it with a drier in order to fix it (※ Please be careful of burns when using a drier on high heat)

◆アルミ製 スプリング リテーナー 0mm がオススメ! / Aluminum Spring Retainer 0mm is the superset

スプリング長が32mmの PCリアスプリングには 取付高さ0mmの アルミ製 スプリング リテーナー(RD-007-0 ¥980)がオススメです。
外側のガイド部で取付ガタを抑制し、スプリング本来の性能を極限まで発揮させることが可能です。
For PC rear springs with a spring length of 32 mm, we recommend the aluminum spring retainer (RD-007-0 ¥980) with a mounting height of 0 mm. It is possible to suppress the mounting play with the outer guide part and maximize the original performance of the spring.

◆オールインワンセットも! / Full box sets are also in avail!
PC リア スプリング(全3種類)が 収納に便利な専用BOXに入った オールインワンセット【RD-010AS、¥2,500(税別)】もラインナップ!
こちらも是非ご検討下さい!
A special full box set【RD-010AS、2,500JPY】 is also available with a set of all 3 types of PC rear springs. By using this all in one box set of springs, you can easy to carry all the springs to enjoy various course layouts, road surface.
Please consider to try this products.

  • このエントリーをはてなブックマークに追加
ページ上部へ戻る